{"id":7061,"date":"2019-12-18T09:31:40","date_gmt":"2019-12-18T08:31:40","guid":{"rendered":"http:\/\/zintek.attivamultimedia.com\/?page_id=7061"},"modified":"2024-06-26T15:16:26","modified_gmt":"2024-06-26T13:16:26","slug":"technical-file","status":"publish","type":"page","link":"https:\/\/www.zintek.it\/en\/product\/technical-file\/","title":{"rendered":"Technical File"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

TECHNICAL FILE OF ROLLED ZINC-TITANIUM ZINTEK\u00ae PRODUCTS
\n<\/strong>\u2014<\/strong><\/h2>\n

zintek\u00ae<\/strong>\u00a0is a high quality Zinc-Copper-Titanium alloy, fully compliant with\u00a0European standard EN 988<\/strong>\u00a0\u201cZinc and Zinc alloys\u201d requirements for rolled flat products for the construction industry.<\/p>\n

This standard outlines the requirements for flat rolled products made of Zinc-Copper-Titanium alloys used in buildings and supplied in the form of coils, sheets or strips.<\/p>\n

The alloy must be produced from\u00a0Z1 quality 99.995 Zinc<\/strong>\u00a0according to European standard\u00a0EN 1179<\/strong>, with the addition of alloying elements.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

zintek\u00ae material standard:\u00a0UNI EN 988 \u2013 COMPOSITION IN %<\/strong><\/h4>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
<\/td>\nMIN<\/strong><\/td>\nMAX<\/strong><\/td>\n<\/td>\n<\/tr>\n
Cu<\/strong><\/td>\n0,08<\/td>\n1<\/td>\n<\/td>\n<\/tr>\n
Ti<\/strong><\/td>\n0,06<\/td>\n0,2<\/td>\n<\/td>\n<\/tr>\n
Al<\/strong><\/td>\n\u2014<\/td>\n0,015<\/td>\n<\/td>\n<\/tr>\n
Zn<\/strong><\/td>\n\u2014<\/td>\n\u2014<\/td>\nremainder<\/td>\n<\/tr>\n
Z1-quality zinc<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n
\n
\n
Z1 quality zinc<\/strong><\/h5>\n

The alloying components improve the characteristics of the zinc laminate:<\/p>\n

Titanium<\/strong>\u00a0increases\u00a0resistance against permanent deformation<\/strong>\u00a0over the course of time;<\/p>\n

Copper<\/strong>\u00a0increases the\u00a0tensile strength<\/strong>\u00a0of the material.<\/p>\n

The combination of the two decreases the\u00a0expansion coefficient<\/strong> of the alloy.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\u2014 Please refer to UNI EN 1179 table \u2014<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

zintek\u00ae material standard:\u00a0UNI EN 988<\/strong>\u00a0\u2013\u00a0MECHANICAL CHARACTERISTICS<\/strong><\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\r\n\r\n\r\n\r\n\r\n\r\n\r\n
Offset from proportionality unit load<\/td>\r\n0.20%<\/td>\r\nRp 0.2<\/td>\r\nN\/mm2<\/sup><\/td>\r\nmin 100<\/td>\r\n<\/tr>\r\n
Tensile strength<\/td>\r\n<\/td>\r\nRm<\/td>\r\nN\/mm2<\/sup><\/td>\r\nmin 150<\/td>\r\n<\/tr>\r\n
Elongation percentage after break<\/td>\r\n<\/td>\r\nA50 mm<\/td>\r\n%<\/td>\r\nmin 35<\/td>\r\n<\/tr>\r\n
Sliding elongation percentage<\/td>\r\n<\/td>\r\n<\/td>\r\n%<\/td>\r\nmax 0.1<\/td>\r\n<\/tr>\r\n
Minimum hardness<\/td>\r\n<\/td>\r\n<\/td>\r\n<\/td>\r\nHV 45<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Primary Zinc UNI EN 1179 Standard<\/strong><\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Type classification<\/th>\nNominal zinc content<\/th>\n1 max
\nPb<\/th>\n		2 max
\nCd<\/th>\n		3 max
\nFe<\/th>\n		4 max
\nSn<\/th>\n		5 max
\nCu<\/th>\n		6 max
\nAl<\/th>\n		Total of elements 1-6 max<\/th>\n<\/tr>\n
Z1<\/strong><\/td>\n99.995<\/td>\n0.003<\/td>\n0.003<\/td>\n0.002<\/td>\n0.001<\/td>\n0.001<\/td>\n0.001<\/td>\n0.003<\/td>\n<\/tr>\n
Z2<\/strong><\/td>\n99.990<\/td>\n0.005<\/td>\n0.005<\/td>\n0.003<\/td>\n0.001<\/td>\n0.002<\/td>\n\u2013<\/td>\n0.005<\/td>\n<\/tr>\n
Z3<\/strong><\/td>\n99.950<\/td>\n0.030<\/td>\n0.020<\/td>\n0.020<\/td>\n0.001<\/td>\n0.002<\/td>\n\u2013<\/td>\n0.050<\/td>\n<\/tr>\n
Z4<\/strong><\/td>\n99.500<\/td>\n0.450<\/td>\n0.050<\/td>\n0.050<\/td>\n\u2013<\/td>\n\u2013<\/td>\n\u2013<\/td>\n0.500<\/td>\n<\/tr>\n
Z5<\/strong><\/td>\n98.500<\/td>\n1.400<\/td>\n0.050<\/td>\n0.050<\/td>\n\u2013<\/td>\n\u2013<\/td>\n\u2013<\/td>\n1.500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Physical and technological characteristics<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
DESCRIPTION<\/td>\r\nMEASUREMENT UNIT<\/td>\r\nVALUE<\/td>\r\n<\/tr>\r\n
Density<\/td>\r\nKg\/dm3<\/sup><\/td>\r\n7.14<\/td>\r\n<\/tr>\r\n
Melting point<\/td>\r\n\u00b0C<\/td>\r\n419<\/td>\r\n<\/tr>\r\n
Specific heat at 20 \u00b0C<\/td>\r\nkJ\/Kg \u00b0C<\/td>\r\n0.401<\/td>\r\n<\/tr>\r\n
Thermal conductivity at 20 \u00b0C<\/td>\r\nW\/m \u00b0K<\/td>\r\n109<\/td>\r\n<\/tr>\r\n
Electrical conductivity at 20 \u00b0C<\/td>\r\nm\/ohm mm2<\/sup><\/td>\r\n17<\/td>\r\n<\/tr>\r\n
Thermal expansion coefficient in parallel direction to the lamination<\/td>\r\nmm\/m \u00b0C<\/td>\r\n0.022<\/td>\r\n<\/tr>\r\n
Thermal expansion coefficient in transversal direction to the lamination<\/td>\r\nmm\/m \u00b0C<\/td>\r\n0.017<\/td>\r\n<\/tr>\r\n
Re-crystallization limit<\/td>\r\n\u00b0C<\/td>\r\n> 300<\/td>\r\n<\/tr>\r\n
Elasticity modulus<\/td>\r\nN\/mm2<\/sup><\/td>\r\n> 80,000<\/td>\r\n<\/tr>\r\n
Erichsen value<\/td>\r\nmm<\/td>\r\n07-set<\/td>\r\n<\/tr>\r\n
Bend test 180\u00b0 at 20 \u00b0C in longitudinal direction<\/td>\r\nn\u00b0<\/td>\r\n3 minimo<\/td>\r\n<\/tr>\r\n
Bend test 180\u00b0 at 20 \u00b0C in transversal direction<\/td>\r\nn\u00b0<\/td>\r\n5 minimo<\/td>\r\n<\/tr>\r\n
Rigidity<\/td>\r\n%<\/td>\r\n40-55<\/td>\r\n<\/tr>\r\n
Nonmagnetic<\/td>\r\n<\/td>\r\n<\/td>\r\n<\/tr>\r\n
Non-combustible<\/td>\r\n<\/td>\r\n<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Calculation of masses<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
NOMINAL THICKNESS<\/p>\n

mm<\/td>\n

APPROXIMATE MASS
\nKg\/m2<\/td>\n<\/tr>\n
0.6<\/td>\n4.3<\/td>\n<\/tr>\n
0.65<\/td>\n4.7<\/td>\n<\/tr>\n
0.7<\/td>\n5<\/td>\n<\/tr>\n
0.8<\/td>\n5.8<\/td>\n<\/tr>\n
1<\/td>\n7.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Lifespan<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
DURATA ZINTEK\u00ae IN DIVERSI AMBIENTI<\/th>\r\n<\/tr>\r\n
ENVIRONMENT<\/th>\r\nDURABILITY<\/th>\r\n<\/tr>\r\n
Countryside<\/td>\r\n100+ years<\/td>\r\n<\/tr>\r\n
Industrial city<\/td>\r\n60 years<\/td>\r\n<\/tr>\r\n
Industrial cluster<\/td>\r\n40 years<\/td>\r\n<\/tr>\r\n
Seaside city<\/td>\r\nFrom 40 to 60 years<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Supply<\/h3>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
<\/div>\n\t\t\t\t
<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tZINTEK\u00ae IN STRIPS\t\t\t\t\t<\/h2>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t

The zintek\u00ae coils with an internal diameter of 508 mm, on an inner cardboard roll with or without protective film, appropriately packaged, stored on special wooden pallets to enable easy handling until they are used.<\/p>\n\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Width of the coils<\/th>\n<\/tr>\n
125 mm<\/td>\n<\/tr>\n
200 mm<\/td>\n<\/tr>\n
330 mm<\/td>\n<\/tr>\n
410 mm<\/td>\n<\/tr>\n
500 mm<\/td>\n<\/tr>\n
550 mm<\/td>\n<\/tr>\n
570 mm<\/td>\n<\/tr>\n
620 mm<\/td>\n<\/tr>\n
670 mm<\/td>\n<\/tr>\n
1,000 mm<\/td>\n<\/tr>\n
1,250 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
<\/div>\n\t\t\t\t
<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\tZINTEK\u00ae IN SHEETS\t\t\t\t\t<\/h2>\n\t\t\t\t\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t

zintek\u00ae is cut in perfectly flat sheets on wooden pallets strapped and protected by waterproofed paper on the bottom and cardboard on the top.<\/p>\n\t\t\t\t\t<\/div>\n\t\t\t\t\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n
Sheet formats<\/th>\n<\/tr>\n
1,000 x 2,000 mm<\/td>\n<\/tr>\n
1,000 x 3,000 mm<\/td>\n<\/tr>\n
1,250 x 2,000 mm<\/td>\n<\/tr>\n
1,250 x 3,000 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Available thicknesses for strips and sheets<\/th>\n<\/tr>\n
0.60 mm<\/td>\n<\/tr>\n
0.65 mm<\/td>\n<\/tr>\n
0.70 mm<\/td>\n<\/tr>\n
0.80 mm<\/td>\n<\/tr>\n
1.00 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Different thicknesses, up to 2.00 mm, can be supplied on request.<\/strong><\/p>\n

NB:<\/strong>\u00a0The titanium-zinc zintek\u00ae<\/sup>\u00a0strips, sheets and profiles with a minimum thickness of 0.70 mm are used for roof claddings, connection sheet metal work, water collection gutters, fa\u00e7ade claddings, fa\u00e7ade connections and suspended ceilings.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Dimensional tolerances<\/th>\n<\/tr>\n
Thickness<\/td>\n+\/-0.03 mm<\/td>\n<\/tr>\n
Width<\/td>\n0\/+2 mm<\/td>\n<\/tr>\n
Length<\/td>\n0\/+10 mm<\/td>\n<\/tr>\n
Straightness<\/td>\n\u2265 1.5 mm\/m<\/td>\n<\/tr>\n
Flatness<\/td>\n\u2265 2 mm\/m<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Indications for managing supply lots with pre-weathered and colored surfaces<\/strong><\/p>\n

It is normal for the production lots of titanium-zinc zintek\u00ae\u00a0to have slight surface color variations (hues \/ shades).\u00a0For this reason, we recommend using strips and sheets from the same lot for each project.<\/p>\n

For every coil ordered, you can request a sample in A4 format from the same roll to check the chromatic uniformity of the supply; the samples must be examined and used to manage the lots and the strips applied in the projects in order to avoid differences in shades.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Control<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Control documents<\/strong>
\nAt the buyer\u2019s request, at the time of the order the manufacturer must issue a control document pursuant to EN 10204, based on tests for the batch supplied, or statistical quality control measurements, as specified by the buyer.<\/p>\n

Designation<\/strong>
\nThe designation system requires the product denomination (Zn Ti Cu), the European standard number (EN 988), the required nominal thickness (e.g. 0.70 mm) and the nominal width in mm or nominal length in mm (in the case of sheets).<\/p>\n

Marking<\/strong>
\nUnless agreed otherwise, the marking must specify:
\n\u2022 the name of the product;
\n\u2022 the European standard number (EN 988);
\n\u2022 the casting and\/or roll number;
\n\u2022 the product name or trademark.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

CE marked zintek\u00ae products:<\/strong><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
Cod. Prod.<\/th>Descrizione<\/th>Norma<\/th>Etichetta CE<\/th>Tipo DOP<\/th>Specifiche Tecniche<\/th><\/tr><\/thead>
DOP.A01<\/div><\/td>
Natural zintek\u00ae in slabs<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.A02<\/div><\/td>
Natural zintek\u00ae in slabs\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.A03<\/div><\/td>
Shaped natural zintek\u00ae rolled products\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.A04<\/div><\/td>
Natural zintek\u00ae tinsmithery accessories\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.A05<\/div><\/td>
Natural rolled zintek\u00ae\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.A06<\/div><\/td>
Natural perforated zintek\u00ae\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B01<\/div><\/td>
Pre-weathered zintek\u00ae in slabs\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B02<\/div><\/td>
Pre-weathered zintek\u00ae in coils\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B03<\/div><\/td>
Shaped pre-weathered zintek\u00ae rolled products\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B04<\/div><\/td>
Pre-weathered zintek\u00ae tinsmithery accessories\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B05<\/div><\/td>
Pre-weathered rolled zintek\u00ae\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.B06<\/div><\/td>
Pre-weathered perforated zintek\u00ae\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C01<\/div><\/td>
zintek\u00ae The Color Line in slabs\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C02<\/div><\/td>
zintek\u00ae The Color Line in coils\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C03<\/div><\/td>
zintek\u00ae Shaped The Color Line rolled products\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C04<\/div><\/td>
zintek\u00ae The Color Line tinsmithery accessories\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C05<\/div><\/td>
zintek\u00ae The Color Line rolled\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
DOP.C06<\/div><\/td>
zintek\u00ae The Color Line perforated\t<\/div><\/td>
UNI EN 14783<\/div><\/td>
Download<\/a><\/div><\/td><\/tr><\/tbody><\/table><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Surface appearance<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The natural look of zintek\u00ae is a glossy grey laminate, smooth and shiny.<\/p>\n

When exposed to the weather, the surface covers with a self-protecting layer, which remains stable over time and lends the surface a natural aged look, with a pleasant grey slate appearance.<\/p>\n

The oxidation process of zintek\u00ae material may change the chromatic coordinates of the surface unevenly, resulting in areas with different shades of grey. This is just a transitional process that will terminate with a pleasant uniform colouring of the entire surface.<\/p>\n

The natural appearance of the laminate can be changed with special surface treatments, without altering its corrosion resistance requirements.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Behaviour<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Behaviour with exposure to weather and resistance against corrosion<\/strong>
\nThe protective layer that forms when zinc comes into contact with oxygen and water consists of a layer of basic zinc carbonate, which protects the metal. This is the natural protective process of zinc, which ensures the durability of the product over time.<\/p>\n

Behaviour with changes in temperature conditions<\/strong>
\nThe laminate is not affected by temperature changes following its processing and installation. Its melting point is around 419\u00b0 C, with a recrystallization limit of 300\u00b0 C, an essential factor for brazing. It is non-combustible and resistant to ultraviolet rays, with no known wind-caused erosions.<\/p>\n

Reaction to chemical action<\/strong>
\nContact with acids and alkaline substances must be avoided.<\/p>\n

Reaction to electrochemical action<\/strong>
\nWhen they come into contact with one-another, different metals can sustain damage due to their difference in potential. zintek\u00ae laminate should never come into contact with copper and its alloys (brass), whether directly or indirectly, e.g. via rainwater flowing through copper covers or parts to other parts made of zintek\u00ae laminate.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Corrosion resistance<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Constant and rigorous lab tests allow to monitor the resistance characteristics against corrosion of products deriving from the treatment process.<\/p>\n

The tests concerning atmospheric oxidation resistance, conferred by the surface treatment, are carried out in a saline mist chamber, in compliance with standard\u00a0ASTM B 11<\/strong>, and in a humidity chamber, in compliance with standard\u00a0ASTM D 2247<\/strong>.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Workability<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Given its physical and chemical properties, the zintek\u00ae material possesses high levels of ductility and malleability, making it suitable for any tinsmithery applications.<\/p>\n

The laminate must not be used at a temperature below 10\u00b0 C. Good practice requires that processing take place only after allowing the temperature of the laminate to cool to the minimum specified value. Concerning works carried out during the winter months, it is advisable to follow best practices and to pre-fabricate the elements in a workshop environment, where the temperature conditions are more favourable. For all processes that need to be performed on-site, a slight pre-heating of the laminate can be performed by using hot air ventilation.<\/p>\n

Temperature variations occurring after the processing and installation of the laminate have no influence on the product\u2019s behaviour.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Weldability<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

zintek\u00ae material has excellent weldability properties, using either traditional methods with a Lead \/ Tin brazing alloy or more recent TIG or induction techniques.<\/span><\/p>\n

In cases in which a mechanical joining of zintek\u00ae laminate is performed by using screws or nails, the preferred materials are: aluminium, galvanised steel or stainless steel.<\/p>\n

Copper and its alloys, such as brass, are not recommended, due to the electrochemical corrosion these materials may cause.<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Ecology and Sustainability<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Ecology and the environment<\/strong>
\nTests have shown that the transfer of zinc due to flowing rainwater causes no risk to the environment.<\/p>\n

Maintenance<\/strong>
\nUnlike other materials, zintek\u00ae requires no maintenance.<\/p>\n

Recycling<\/strong>
\nZinc used for covering solutions or other types of construction works is completely recyclable and re-usable in a variety of industries, and maintains a high market value even as scrap metal.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Transport<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

zintek\u00ae products must be transported by suitable means only. A dry and ventilated space must be guaranteed for all transport operations. The loading and unloading of vehicles must occur in a dry place and\/or under a canopy. Avoid transporting the product on damp, humid pallets. The surface protection should be suited to avoid possible damage.
\n<\/span><\/p>\n

During the crimping of the pallet, be sure to stand in a stable position, and make sure there is enough space, in order to avoid any damage.<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Storage<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

zintek\u00ae products must be stored in a dry and well ventilated area. Humidity levels must be checked constantly.\u00a0 Stocked products must be protected against humidity.<\/p>\n

Avoid unprotected outdoor storage. Direct covering of the coils or profiles should be avoided, especially if there are no aerated spaces between one item and the next. It is important to prevent the formation of condensation if the temperature drops below the dew point inside the storage area.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

ZC type laminate for tinsmithery accessories<\/h3>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The \u201cZC\u201d laminate is especially suitable for any application subjected to significant processing stress. For its production, Zinc SHG 99.995 is used exclusively as a raw material, pursuant to standard EN 1179: 95 Z1, with the addition of suitable alloying. Produced by using special laminating processes, it takes on the physical and mechanical qualities which best respond to the specifications requested by users.<\/p>\n

This laminate possesses a high ductility rate, and can therefore be elongated significantly, both parallel and transversal to the rolling direction. It also lends itself well to deep-drawing, even when processed cold; it can be bent by 180 degrees without cracking, and folded without breaking. Furthermore, it welds very easily, using both traditional methods and the latest TIG or induction welding techniques. It is especially suitable for the production of all types of tinsmithery accessories.<\/p>\n

Possiede un\u2019elevata duttilit\u00e0 e pertanto pu\u00f2 raggiungere notevoli allungamenti sia in senso parallelo sia in senso trasversale alla laminazione. Si presta a profonde imbutiture eseguite anche a freddo, si pu\u00f2 piegare a 180\u00b0 senza incrinature e ripiegare senza rotture. Inoltre si pu\u00f2 saldare molto facilmente sia con metodi tradizionali sia con le pi\u00f9 recenti tecniche di saldatura a TIG o a induzione. \u00c8 particolarmente adatto per la produzione di tutti gli accessori per lattoneria.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys” requirements for rolled flat products for the construction industry.<\/p>\n","protected":false},"author":1,"featured_media":6066,"parent":7046,"menu_order":3,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"page_category":[],"class_list":["post-7061","page","type-page","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"\nTechnical file of rolled zintek\u00ae titanium zinc products<\/title>\n<meta name=\"description\" content=\"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.zintek.it\/en\/product\/technical-file\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Technical file of rolled zintek\u00ae titanium zinc products\" \/>\n<meta property=\"og:description\" content=\"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.zintek.it\/en\/product\/technical-file\/\" \/>\n<meta property=\"og:site_name\" content=\"Zintek\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/ZintekSrl\" \/>\n<meta property=\"article:modified_time\" content=\"2024-06-26T13:16:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"1080\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/\",\"url\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/\",\"name\":\"Technical file of rolled zintek\u00ae titanium zinc products\",\"isPartOf\":{\"@id\":\"https:\/\/www.zintek.it\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg\",\"datePublished\":\"2019-12-18T08:31:40+00:00\",\"dateModified\":\"2024-06-26T13:16:26+00:00\",\"description\":\"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d\",\"breadcrumb\":{\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.zintek.it\/en\/product\/technical-file\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage\",\"url\":\"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg\",\"contentUrl\":\"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg\",\"width\":1920,\"height\":1080},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.zintek.it\/en\/product\/technical-file\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.zintek.it\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Product\",\"item\":\"https:\/\/www.zintek.it\/en\/prodotto\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Technical File\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.zintek.it\/en\/#website\",\"url\":\"https:\/\/www.zintek.it\/en\/\",\"name\":\"Zintek: Coperture e Rivestimenti in laminato zinco-titanio\",\"description\":\"titanium-zinc in architecture\",\"publisher\":{\"@id\":\"https:\/\/www.zintek.it\/en\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.zintek.it\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.zintek.it\/en\/#organization\",\"name\":\"Zintek Srl\",\"url\":\"https:\/\/www.zintek.it\/en\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.zintek.it\/en\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.zintek.it\/wp-content\/uploads\/2020\/02\/logo-ZINTEK-IT-nero.png\",\"contentUrl\":\"https:\/\/www.zintek.it\/wp-content\/uploads\/2020\/02\/logo-ZINTEK-IT-nero.png\",\"width\":480,\"height\":86,\"caption\":\"Zintek Srl\"},\"image\":{\"@id\":\"https:\/\/www.zintek.it\/en\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/ZintekSrl\",\"https:\/\/www.instagram.com\/zintek_official\/\",\"https:\/\/www.linkedin.com\/company\/zintek\/\",\"https:\/\/www.pinterest.it\/zintek\/\",\"https:\/\/www.youtube.com\/channel\/UCFx20rqQN2rP7iV4rRYVRGg\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Technical file of rolled zintek\u00ae titanium zinc products","description":"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.zintek.it\/en\/product\/technical-file\/","og_locale":"en_US","og_type":"article","og_title":"Technical file of rolled zintek\u00ae titanium zinc products","og_description":"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d","og_url":"https:\/\/www.zintek.it\/en\/product\/technical-file\/","og_site_name":"Zintek","article_publisher":"https:\/\/www.facebook.com\/ZintekSrl","article_modified_time":"2024-06-26T13:16:26+00:00","og_image":[{"width":1920,"height":1080,"url":"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/","url":"https:\/\/www.zintek.it\/en\/product\/technical-file\/","name":"Technical file of rolled zintek\u00ae titanium zinc products","isPartOf":{"@id":"https:\/\/www.zintek.it\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage"},"image":{"@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg","datePublished":"2019-12-18T08:31:40+00:00","dateModified":"2024-06-26T13:16:26+00:00","description":"zintek\u00ae is a high quality Zinc-Copper-Titanium alloy, fully compliant with European standard EN 988 \u201cZinc and Zinc alloys; requirements for rolled flat products for the construction industry.\u201d","breadcrumb":{"@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.zintek.it\/en\/product\/technical-file\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/#primaryimage","url":"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg","contentUrl":"https:\/\/www.zintek.it\/wp-content\/uploads\/2019\/12\/Prodotto-zintek-SchedaTecnica.jpg","width":1920,"height":1080},{"@type":"BreadcrumbList","@id":"https:\/\/www.zintek.it\/en\/product\/technical-file\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.zintek.it\/en\/"},{"@type":"ListItem","position":2,"name":"Product","item":"https:\/\/www.zintek.it\/en\/prodotto\/"},{"@type":"ListItem","position":3,"name":"Technical File"}]},{"@type":"WebSite","@id":"https:\/\/www.zintek.it\/en\/#website","url":"https:\/\/www.zintek.it\/en\/","name":"Zintek: Coperture e Rivestimenti in laminato zinco-titanio","description":"titanium-zinc in architecture","publisher":{"@id":"https:\/\/www.zintek.it\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.zintek.it\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.zintek.it\/en\/#organization","name":"Zintek Srl","url":"https:\/\/www.zintek.it\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.zintek.it\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.zintek.it\/wp-content\/uploads\/2020\/02\/logo-ZINTEK-IT-nero.png","contentUrl":"https:\/\/www.zintek.it\/wp-content\/uploads\/2020\/02\/logo-ZINTEK-IT-nero.png","width":480,"height":86,"caption":"Zintek Srl"},"image":{"@id":"https:\/\/www.zintek.it\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/ZintekSrl","https:\/\/www.instagram.com\/zintek_official\/","https:\/\/www.linkedin.com\/company\/zintek\/","https:\/\/www.pinterest.it\/zintek\/","https:\/\/www.youtube.com\/channel\/UCFx20rqQN2rP7iV4rRYVRGg\/"]}]}},"_links":{"self":[{"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/pages\/7061","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/comments?post=7061"}],"version-history":[{"count":0,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/pages\/7061\/revisions"}],"up":[{"embeddable":true,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/pages\/7046"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/media\/6066"}],"wp:attachment":[{"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/media?parent=7061"}],"wp:term":[{"taxonomy":"page_category","embeddable":true,"href":"https:\/\/www.zintek.it\/en\/wp-json\/wp\/v2\/page_category?post=7061"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}